Smoke Alarm Installation Cost: What Affects the Price
Last updated 21 November 2026
The cost of smoke alarm installation depends on whether the alarms are mains powered or battery, how they are interlinked, how many smoke, heat and carbon monoxide alarms you need and how easy it is to run cables. New homes and extensions need mains powered, interlinked alarms, and landlords must have a smoke alarm on every storey used as living accommodation. We give free quotations.
The cost of fitting smoke alarms depends on the type of alarm you choose, how many you need, whether they are linked together and how easy it is to run wiring if they are mains powered. A few battery alarms are a very different job from a full system of mains powered, interlinked smoke and heat alarms. This guide explains what affects the price and which rules may decide the type of system you need. It covers homes in England.
Start with what you need
Before thinking about cost, it helps to know what kind of system suits your home.
- New homes and extensions are covered by the Building Regulations, which expect mains powered smoke alarms with a backup supply, interlinked so that they all sound together.
- Rented homes must have a smoke alarm on every storey used as living accommodation and a carbon monoxide alarm in any room with a fixed combustion appliance, other than a gas cooker, under the Smoke and Carbon Monoxide Alarm (England) Regulations 2015 as amended in 2022.
- Homes you own and live in have no general legal requirement in an existing property, but working alarms are strongly recommended.
Our smoke and heat alarm regulations guide explains grades, categories and where alarms should go.
What affects the cost
Mains powered or battery
Mains powered alarms need a supply from a suitable circuit and a cable to each alarm, so they involve more labour. Sealed battery alarms do not need wiring, so they are quicker to fit. Mains powered alarms normally include a backup battery, so they keep working in a power cut.
Interlinking
Interlinked alarms all sound when one of them detects a fire, so you hear the warning wherever you are in the home. Interlinking can be done with cables between the alarms or by radio between compatible alarms. Wired interlinking needs more cabling, while radio interlinking avoids it but the alarms themselves can cost more.
The number and type of alarms
The more storeys and rooms you cover, the more alarms you need. A typical system combines smoke alarms in the hallway and on the landing with a heat alarm in the kitchen, and may add alarms in the living room and bedrooms for a higher level of protection. Carbon monoxide alarms add to the total where there is a fuel-burning appliance.
Access for wiring
For mains powered alarms, the cable route matters. A house with an accessible loft and suspended floors is easier than a flat with solid ceilings, or a home with finished decoration where cables need to be hidden. Some installations use neat surface trunking where hidden cabling is not practical.
Doing it alongside other work
If you are having a rewire, a consumer unit change or a renovation, adding mains powered alarms at the same time is usually more efficient than fitting them later. Our rewire cost guide covers rewiring.
Getting the positions right
Alarms need to be positioned where they will detect a fire early without giving frequent false alarms. Smoke alarms are usually fitted on the ceiling in hallways and on landings, clear of walls and light fittings, while heat alarms are used in kitchens, where cooking fumes would set off a smoke alarm. Alarms should not be placed where steam from a bathroom can reach them, or in garages and lofts unless they are designed for that location. Getting the positions right reduces nuisance alarms, which in turn means people are less tempted to disable them.
What happens on the day
Battery alarms are quick to fit. For mains powered alarms, the electrician will isolate the circuit, run the cables, fit the alarm bases and alarms, and then test each alarm and the interlink so that all the alarms sound together. You should be shown how to test and silence them before the electrician leaves.
Landlords
For existing rented homes, the regulations do not set the type of alarm, so sealed battery alarms can be acceptable, although mains powered interlinked alarms give better protection. The landlord must make sure the alarms are working on the day each new tenancy starts and must repair or replace alarms once told they are faulty. Houses in multiple occupation may need a more extensive system, often decided by the fire risk assessment or licensing conditions. Our guide to electrical safety for landlords covers the wider duties.
Larger and non-domestic premises
The shared areas of flats, HMOs and business premises may need a full fire alarm system rather than individual alarms. These systems are designed to BS 5839, and the right one depends on the fire risk assessment. See our fire alarm installation page for that type of work.
Testing and replacing alarms
Alarms only protect you if they work. Test them regularly using the test button, as described in our blog post on how to test smoke alarms, and replace them when they reach the end of the life given by the manufacturer. Never cover an alarm or remove its battery to stop nuisance alarms. If an alarm keeps going off, ask for advice about its position or type.
How to compare quotations
When comparing prices, check:
- how many alarms are included, and of which type;
- whether they are mains powered, battery or radio interlinked;
- whether heat and carbon monoxide alarms are included;
- how cables will be run and whether making good is included;
- that the installation will be tested and certified.
Get a quotation
We do not publish set prices for alarm installations, because every home is different. Call 01253 364101 or send us a message for a free quotation, and see our domestic electrical services for other work in the home.
Frequently asked questions
How much does it cost to have smoke alarms fitted?
There is no single price. It depends on how many alarms you need, whether they are mains powered or battery, how they are interlinked and how easy it is to run cables. We give free quotations for your home.
Are mains powered smoke alarms better than battery alarms?
Mains powered alarms with a backup battery do not depend on you replacing batteries, and they are what the Building Regulations expect in new homes. Sealed battery alarms are quicker to fit and can be suitable in existing homes.
Can radio interlinked alarms be fitted instead of wired ones?
Yes. Radio interlinked alarms link to each other without cables between them, which can reduce disruption. They still need to be positioned correctly, and mains powered versions still need a supply.
Do landlords need mains powered smoke alarms?
Not in every case. For existing rented homes in England, the regulations require working alarms on every storey with living accommodation but do not set the type. New homes and extensions need mains powered alarms under the Building Regulations.
How many smoke alarms do I need?
At least one on every storey of your home, and more for a higher level of protection, such as in the living room and bedrooms, with a heat alarm in the kitchen. The right number depends on the layout of the property.
Sources
- GOV.UK, Smoke and carbon monoxide alarms: explanatory booklet for landlordshttps://www.gov.uk/government/publications/smoke-and-carbon-monoxide-alarms-explanatory-booklet-for-landlords
- GOV.UK, Fire safety: Approved Document Bhttps://www.gov.uk/government/publications/fire-safety-approved-document-b
- Lancashire Fire and Rescue Servicehttps://www.lancsfirerescue.org.uk/
