Blackpool & Fylde Electrical Services Ltd logo

Electric Shower Installation Cost: What Affects the Price

Last updated 21 November 2026

The cost of installing an electric shower depends mainly on whether a suitable circuit already exists. Replacing a shower with a similar rating on a sound circuit is usually simpler than fitting a new or more powerful shower, which needs a dedicated circuit, a correctly sized cable, an isolating switch and 30mA RCD protection. The cable route, consumer unit and making good also affect the price. We give free quotations.

An electric shower heats water as it flows, which means it draws a large current while it is running. That is why the electrical side of a shower installation matters as much as the plumbing, and why the cost can vary so much from one home to the next. This guide explains what affects the price of installing or replacing an electric shower, what the electrician will check and which rules apply. It covers homes in England.

Replacing a shower or installing a new one

The biggest single factor is whether a suitable circuit already exists.

Replacing an existing shower can be relatively straightforward if the new shower has a similar power rating and the existing circuit, cable and protection are suitable for it. The electrician will still check the circuit before connecting the new unit.

Installing a shower where there was not one before, or fitting a more powerful shower, usually needs a new dedicated circuit from the consumer unit, with a cable sized for the load and a suitable isolating switch. That is more work and costs more.

What affects the cost

The power rating of the shower

Electric showers come in a range of power ratings. A more powerful shower draws more current, so it needs a cable and protective device that can carry that load safely. If you are upgrading to a more powerful model, the existing cable may not be large enough, and replacing it adds to the job.

The cable route

The cable has to run from the consumer unit to the bathroom. A short, easy route through a loft or under suspended floors costs less than one that needs floors lifted, walls chased or long runs through a finished home.

The consumer unit

The shower circuit needs a spare way in the consumer unit and the right protection. BS 7671 requires circuits serving a room containing a bath or shower to have 30mA RCD protection. If the consumer unit is old, full or lacks RCD protection, it may need upgrading. Our guide to consumer unit replacement costs explains what that involves.

Your supply

The electrician will consider whether your incoming supply can cope with the shower alongside your other loads, such as a cooker, an immersion heater or an EV charger. In most homes this is fine, but it needs checking.

The bathroom itself

Bathrooms are special locations under BS 7671 because of the extra risk from water. The positions of the shower, the isolating switch and other equipment have to suit the zones around the bath or shower, and supplementary bonding may need checking. Making good tiles or decoration after the work also affects the price.

Plumbing

The water supply and waste are plumbing work, which may be done by a plumber or arranged separately. Check whether a quotation covers the plumbing, the electrical work or both.

Part P and certificates

Installing a new circuit for a shower is notifiable work under Part P of the Building Regulations in England, and other work in a bathroom may also be notifiable depending on what is done. A registered electrician can self-certify it. You should receive an Electrical Installation Certificate for a new circuit, or a Minor Electrical Installation Works Certificate for smaller alterations, and a Building Regulations compliance certificate where the work is notifiable. Our Part P and electrical certificates guide explains the difference.

Warning signs to watch for

Because showers draw a heavy current, poor connections can overheat. A burning smell, scorch marks on the pull cord switch or the shower unit, a shower that keeps cutting out or a switch that feels warm all need checking by an electrician straight away. Stop using the shower and switch it off at its isolating switch or at the consumer unit until it has been checked, and do not open the shower unit or attempt repairs yourself. Our blog post on electric shower cables and MCBs explains why the circuit matters, and our emergency electrical repairs page covers urgent faults.

Choosing a shower

Before buying a shower, check its power rating with your electrician, because it decides the size of cable and protective device needed. Buying a more powerful model than your circuit can support means either paying for a new cable or returning the shower. When replacing a shower, a model with a similar rating to the old one is often the simplest option, but the electrician still needs to confirm that the existing circuit is in good condition.

Timing the work with a bathroom refit

If you are refitting the bathroom, plan the electrical work at the start, so that cables can be run before tiling and decorating. Running a new cable after a bathroom is finished usually means more disruption and more making good.

How to compare quotations

When comparing quotations, check:

  • whether the price includes the shower unit or only fitting it;
  • whether a new circuit, cable or isolating switch is included;
  • whether any consumer unit work is needed and included;
  • who does the plumbing and making good;
  • that testing, certification and notification are included.

Get a quotation

We do not publish set prices for shower installations, because the work depends on your existing circuit and the route to the bathroom. See our domestic electrical services, call 01253 364101 or send us a message for a free quotation.

Frequently asked questions

How much does it cost to install an electric shower?

There is no single price. The cost depends mainly on whether a suitable circuit already exists, the power rating of the shower, the cable route, the consumer unit and any making good. We give free quotations for your home.

Can I replace my electric shower with a more powerful one?

Possibly. A more powerful shower draws more current, so the existing cable and protective device must be suitable for it. An electrician needs to check the circuit, and a new cable may be needed.

Does an electric shower need its own circuit?

Yes. An electric shower should be supplied by its own dedicated circuit from the consumer unit, with suitable protection and an isolating switch.

Does an electric shower need RCD protection?

Yes. BS 7671 requires circuits serving a room containing a bath or shower to have 30mA RCD protection.

Is fitting an electric shower notifiable under Part P?

Installing a new circuit is notifiable in England. Whether replacing an existing shower is notifiable depends on the work involved, so ask your electrician, who can self-certify notifiable work if registered.

Sources

Call nowGet a quote